Jensen JBS-500 User Manual page 12

ALARM OPERATION (REMOTE CONTROL ONLY)
SETTING THE ALARM CLOCK
This function allows the system to turn on automatically and wake you using a beeping
alarm (BEEP), DISC (CD), USB, or FM radio.
In standby mode, press and hold ALARM Button on remote control, the alarm icon
1.
and alarm time 12:00 will appear in display. Hour digits of alarm clock start flashing.
2. Press the

confirm, Minute digits will be flashing.
Note: Make sure the hour is set so that the AM/PM indicator is displayed correctly.
3. Press the  or  Button to set the minute and then press the ALARM Button again to
confirm, alarm wake up course will appear in display.
4. Press the  or  Button to select wake to BEEP, DISC, USB, or FM and then press
the ALARM Button again to confirm, alarm volume level will be flashing.
5. Press the  or  Button to set the wake-up alarm volume level and then press the
ALARM Button to finish alarm setup. An alarm icon
Note:
1.) If wake-up source is selected DISC or USB, but a CD or USB is not inserted, the
alarm will default to the Beeping alarm automatically when the alarm wake time is
reached.
2.) For wake-up source selected FM, the system will default to the last FM radio
station listened to before switching off.
ACTIVATE/ DE-ACTIVE ALARM FUNCTION
1. To active ALARM, tap the ALARM Button once in Standby mode, the alarm icon
will show on LCD display.
2. To cancel the ALARM, tap the ALARM Button in Standby mode, the alarm icon
will goes off from LCD display.
Wake to Beeping Alarm, DISC, USB, or FM
When the alarm time is reached, the CD, USB, FM, or beeping alarm will sound for
60 minutes then shut off and reset itself for the following day (without press the
snooze button).
To stop the alarm immediately after it sounds, tape the
Button on remote control or main unit. The alarm will now reset for the following day.
To cancel the following day alarm, tap the ALARM Button once, the ALARM icon
on the display goes off.
SNOOZE FUNCTION
Press SNOOZ/SLEEP button on remote control to activate the SNOOZE function and
temporarily stop the alarm from sounding for 10 minutes. The ALARM icon
flashing in SNOOZE period and the alarm will re-start again after 10 minutes on each
press. To cancel the SNOOZE mode, press the
icon will goes steadily.
or Button to set the hour and then press the ALARM Button again to

shows on display steadily.
Power Button once, the ALARM
E-11
POWER/STANDBY
will keep