Target Device - Omron CK3E Series Connection Manual

2 Target Device and System Configuration
2-1

Target Device

The devices to be used in this guide are as follows.
Manufacturer
OMRON
OMRON
OMRON
OMRON
Precautions for Correct Use
The connection procedures and confirmation methods in this document use the models and
versions of devices described in 2-2 System Configuration on page 2-3 among the above tar-
get devices.
You cannot use devices whose versions are older than those listed in 2-2 System Configuration
on page 2-3.
To use models that are not listed in 2-2 System Configuration on page 2-3 among the above
target devices, or devices whose versions are newer than those listed in 2-2 System Configura-
tion on page 2-3, check their manuals or user's guides to confirm differences in the specifica-
tions before use.
Additional Information
This document provides the connection procedures to establish communications. It does not
provide information other than the connection procedures, such as the operation, installation,
wiring, and functions and motions of the devices. Refer to the relevant manuals or user's
guides, or contact your OMRON representative.
2-2
Name
CK3E-series Programmable Multi-Axis Controller
CK3M-series Programmable Multi-Axis Controller CK3M-CPU1£1
NJ/NX-series CPU Unit
Industrial Switching Hub
Model
CK3E-££££
NX701-££££
NX102-££££
NX1P2-££££££
NJ501-££££
NJ301-££££
NJ101-££££
W4S1-0££
CK3E/CK3M-series EtherNet/IP Connection Guide (O903)