3 EtherNet/IP Connection Procedures
5
Adding the user program execution settings
In the Multiview Explorer, double-click Task
Settings under Configurations and
Setup.
Click the Program Assignment Settings
button and set Program1 to Run.
6
Transferring the non-EtherNet/IP settings
and user program
Click the Online icon in the toolbar.
Then, click the Synchronization icon on
the right side.
Click the Transfer to Controller button.
•
If the message shown on the right ap-
pears, click the Yes button.
•
If the message shown on the right ap-
pears, click the Yes button.
3-8
CK3E/CK3M-series EtherNet/IP Connection Guide (O903)