Icemaker - Hoshizaki KM-1301SRJZ/3 Instruction Manual

1. Icemaker

Icemaker Water Minimum Icemaker
Supply Inlet Water Supply Line Size
1/2" Female Pipe 3/8" Nominal ID
Thread (FPT) Copper Water Tubing or
Equivalent
• An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Remote Condenser
Line Set Connections
Icemaker
Drain Outlet
3/4" FPT
Vent Tube
Bin Drain Outlet
3/4" FPT
Fig. 8 Air-Cooled and Remote Models
Model Shown:
KM-1601SRJZ
Icemaker Drain
Outlet
3/4" Female Pipe
Thread (FPT)
Icemaker Water
Supply Inlet
1/2" FPT
Icemaker
Ice
Storage
Bin
Minimum 3/4" Nominal ID
Hard Pipe or Equivalent
25
Minimum Icemaker
Drain Line Size
3/4" Nominal
ID Hard Pipe or
Equivalent
Minimum 3/8" Nominal ID Copper
Water Tubing or Equivalent
Drain Valve
Icemaker Condensation
Drain Outlet
3/8" OD Hard Tube
Be sure there is sufficient
extra water supply line and
drain line for the appliance
to be pulled out for service.
Separate piping to approved
drain. Leave a 2-inch (5-cm)
vertical air gap between the
end of each pipe and the
drain.
2-inch (5-cm) air gap
Floor Drain
Condensation
Drain Outlet
3/8" OD Hard
Tube
Shut-Off Valve