Icemaker Installation - Hoshizaki KML-325MAJ Instruction Manual

7b) Top Kit Application: Place the bin control assembly 4 1/2" (115 mm) from the left side
of the icemaker on the rear section of the dispenser or ice storage bin. See Fig. 3.
Using the 2 self-drilling screws from the accessory bag, secure the bin control bracket
to the dispenser or ice storage bin.

3. Icemaker Installation

8) Place the icemaker on top of the dispenser unit/ice storage bin. See Figs. 4a and 4b.
NOTICE! Confirm bin control bracket is in its correct position.
Bin Control
Assembly
Fig. 4a
Icemaker
Bin Control
Bracket
Dispenser/Ice Storage Bin
Fig. 3
Icemaker
15
Self-Drilling Screws
Bin Control
Assembly
Fig. 4b
Top Kit
Icemaker