Table of Contents
Advertisement
M06
Format
M06
Description
Execution is carried out up to the word just before M06, and operation stops immediately when M06 is executed. If the spindle motor is
rotating, the rotation stops. M06 is active when "TOOL CHANGE" on the PNC-3200 has been set to "PAUSE."
Tool Change, Please
Hit CANCEL to Break
Display when M06 is executed
Canceling the paused state with the [FEED HOLD/CYCLE ATART] key returns the spindle motor and coordinate values to their state
before stopping. Execution continues from the code which appears after M06.
M30
Format
M30
Description
This instructs the main program to end.
48
Tool Change
End of Program
Advertisement
Table of Contents
