Range And Oven - Jayco ESCAPADE 2004 Owner's Manual

REFRIGERATOR FUSE REPLACEMENT
The electrical circuits of this refrigerator have fuses to protect them from an overload. If a fuse is
unserviceable, replace it as follows.
y
WARNING: Do not operate the refrigerator without the power board cover on the
refrigerator. To prevent a circuit overload and a possible electrical fire, use only these
fuses:
DC control circuit
AC circuit
1. Push the selector switch to the OFF position to shut down the refrigerator.
2. Remove the black AC power cord from the receptacle.
3. Remove the AC power cord from the power board that is at the rear of the refrigerator.
4. Remove the DC power supply wires from the power board.
5. Remove the ignition sense wire from the power board.
6. Remove the gas valve wires from the power board.
7. Remove the mounting screws and the power board cover.
8. Replace the unservicable fuse(s) with the new fuse(s) of the correct type and size.
9. Reverse this procedure and assemble the power board cover and all wiring.
If the fuse(s) continues to become unservicable, consult your dealer or a Norcold authorized
service center.

Range and Oven

y
WARNING:
• Make sure all controls are OFF and the range or cooktop is cool before
cleaning.
• Make sure that all cooktop surfaces, burner grates and bruners are cool
before cleaning or disassembling cooktop.
• Do not use oven cleaners, bleach, or rust removers on the cooktop or burner
grates.
• Do not obstruct the flow of combustion and ventilation air.
• Keep appliance area clear of combustible materials, gasoline and other
flammable vapors and liquids.
• Clean oven with oven cleaner only. Follow directions on the container.
• Never use a wire brush or metallic item for cleaning burner ports or orifices.
Brush may "shed" bristles, that may lodge in the orifice or burner ports and
cause a fire or explosion.
74
5 amp tan blade type automotive fuse
5 amp glass cartridge fuse
Escapade Type C Owner's Manual