Jayco ESCAPADE 2004 Owner's Manual page 70

The TEMP SET button (Fig. 5-6B) controls the temperature adjustment of the freezer ant the fresh
food compartment. The temperature adjustment that you select does not change if the mode of
operation of the refrigerator changes:
• Push the TEMP SET button and the temperature setting "1-9" appears in the center
display(Fig. 5-6C).
• Push and hold the TEMP SET button and the temperature setting changes.
• The number "9" is the coldest temperature setting.
The MODE button (Fig. 5-6D) controls the operation mode of the refrigerator:
• Push and hold the MODE button and a light bar flashes in the center display beside each of the
four operating modes of the refrigerator, one at a time.
• There is one automatic mode of operation and three manual modes of operation.
• When the light bar flashes beside the mode of operation that you wish, release the MODE
button.
AUTOMATIC MODE OPERATION
When you select AUTO mode, the refrigerator controls automatically select the most efficient
energy source that is available for operation. If a more efficient energy source becomes available,
the refrigerator controls change from the current energy source to the more efficient energy source.
The controls select the energy source in this sequence:
• When 120-volt AC is available to the refrigerator:
• The light bars beside AUTO and AC show in the center display.
• After ten seconds, the light bar beside AC goes off and only the light bar beside auto
remains.
• This means that the refrigerator is operating on AC electric.
• If 120-volt AC is not available to the refrigerator:
• The light bars beside AUTO and LP GAS show in the center display.
• After ten seconds, the light bar beside LP goes off and only the light bar beside AUTO
remains.
• This means that the refrigerator is operating on propane gas.
If an energy source is available to the refrigerator, but is not operating correctly:
• A fault code appears in the center display.
• The refrigerator controls try to change to a less efficient energy source.
• If a less efficient energy source is not available:
• The refrigerator stops operation.
• Refer to the "Fault Codes" in the manufacturer's owner's manual.
MANUAL MODE OPERATION
When you select one of the manual modes of operation, the light bar beside the AUTO goes out in
the center display and only the light bar beside either AC, LP, or DC remains.
• AC means that the refrigerator is operating on AC electric.
• LP means that the refrigerator is operating on propane gas.
If the energy source is interrupted:
• The refrigerator stops operation.
• Refer to the "Fault Codes" in the manufacturer's owner's manual.
62 Escapade Type C Owner's Manual