Touchpad Board - HP x2 Detachable 10-p0XX Maintenance And Service Manual

TouchPad board

Description
TouchPad board for use in silver models
TouchPad board for use in white models
TouchPad board for use in red models
TouchPad board cable (for use in HP x2 and HP x2 210 G2 models without a hard drive)
TouchPad board cable (for use in HP x2 models with a hard drive)
Before removing the TouchPad board, follow this step:
▲ Remove the bottom cover (see
Remove the TouchPad board:
1. Disconnect the cable from the TouchPad (1).
2. Remove the three black Phillips PM2.0×2.0 screws (2).
3. Lift the bracket off the board (3).
4. Remove the three broadhead silver Phillips PM2.0×2.0 screws (4).
5. Remove TouchPad board from the dock (5).
Reverse this procedure to install the TouchPad board.
46 Chapter 5 Removal and replacement procedures
Bottom cover on page 40).
Spare part number
902373-001
907508-001
907509-001
902357-001
902358-001