4.
Pull the brackets away from the hard drive (2).
Be sure to transfer the brackets from the old hard drive to the new hard drive.
Reverse this procedure to install the hard drive.
Docking board (models with a hard drive)
Description
Docking board (hard drive models)
Before disassembling the dock, follow this step:
▲
Remove the bottom cover (see
Remove the docking board:
1.
Remove the two Phillips PM2.0×2.0 screws (1) that secure the board to the dock.
2.
Disconnect the touchpad cable from the docking board (2).
Bottom cover on page
40).
Spare part number
902372-001
Dock component replacement procedures
43