Antenna - HP x2 Detachable 10-p0XX Maintenance And Service Manual

Antenna

Description
Antenna
Before removing the antenna, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the battery (see
Remove the antenna:
1. Peel the antenna off the shield (1).
2. Disconnect the antenna cable from the system board (2).
3. Remove the antenna cable from its routing path in the display enclosure (3).
4. Remove the antenna from the display panel assembly (4).
Reverse this procedure to install the antenna.
Back cover on page 22).
Battery on page 29).
Spare part number
902341-001
Tablet component replacement procedures 27