Rtc Battery - HP x2 Detachable 10-p0XX Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
Remove the RTC battery:
1. Disconnect the battery cable from the system board (1), and remove the cable from the clip built into
the display enclosure (2).
2. Lift the battery to disengage the adhesive that secures it to the display enclosure (3).
Reverse this procedure to install the RTC battery.
Back cover on page 22).
Spare part number
902383-001
Tablet component replacement procedures 25