Digiview Data Display Brightness - Cobra Band Ultra XRS 9745 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

DigiView Data Display Brightness

Assistance
Your detector has a Bright display mode (for daytime driving) and three levels
of Dim display modes (Dim for dusk driving, Dimmer for night driving and
Dark where no visual alerts will be displayed) to control the display's
brightness levels. The factory setting is Bright. The factory Dim mode
Secondary Icons
default setting is Dimmer.
Dark Indicator
.
Notice
Select/Dim Button
Press and release
Main Icons
To Change the Brightness to Dim
Press and release the
Tone Visual Display
Select/Dim button once.
Two beeps Dim, Dimmer
Intro Operation Customer Warranty
Assistance
or Dark
Dim Display Dimmer Display Dark Display
Dim Dimmer Dark
Secondary Icons
NOTE
When you change to Dim mode, the unit will enter whichever
Notice
dim default mode is set at the time.
To Change the Brightness to Bright
Press and release the
Tone Visual Display
Select/Dim button again.
One beep Bright
Bright Display
Bright
24 English
Settings
Your Detector
Intro Operation Customer
Setting Dim Default Assistance
You can set the default level for Dim mode (Dim, Dimmer or Dark)
either in Program mode or directly using the Select/Dim button.
Secondary Icons
Notice
To Set the Display Dim Mode Default Directly Using the Set/Dim Button
Press and hold the
Select/Dim button.
Voice
Dim, Dimmer
Release the Select/Dim
or Dark
button to select the
current display as
default.
To Set the Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Display Dim,
Dimmer or Dark.
Voice
Bright
Warranty
Select/Dim Button
Press and hold
Dim
Press
and hold
Dark
Select/Dim
button
Dimmer
Tone or Voice Visual Display
One beep each time the Cycles – see chart above
display cycles
None Dim, Dimmer or Dark
Tone Visual Display Voice
Two beeps Dim Dim
One beep Dimmer Dimmer
One beep Dark Dark
Nothing Comes Close to a Cobra ® 25