9494- XRS 9530-D-B2
4/10/06
Settings
Your Detector
Highway/City Mode
Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
Highway Mode
h
City Mode
c
To Change From Highway Mode to City Mode
Press and release
Tone
Voice
the City button.
One beep
City
To Change From City Mode Back to Highway Mode
Press and release
Tone
Voice
the City button again.
Two beeps
Highway
6
English
11:57 AM
Page 6
Your Detector
DigiView Data Display Brightness
You can choose from four (4) settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
The factory setting is Bright.
Bright
Press and
Dark
release
Dim button
Dimmer
Dark Indicator
City Button
Press and
.
release
To Change the Brightness to Dim
Press and release
the Dim button
once.
To Change the Brightness to Dimmer
Press and release
the Dim button
Visual Display
again.
c
appears
in the display
To Change the Brightness to Dark
Press and release
the Dim button
a third time.
Visual Display
h
appears
in the display
To Change the Brightness to Bright
Press and release
the Dim button a
fourth time.
Settings
Dim
Dim Button
Press and
release
Tone
Voice
Visual Display
One beep
Dim
Display dims
Tone
Voice
Visual Display
None
Dimmer
Display dims further
Tone
Voice
Visual Display
One beep
Dark
Display remains
dim (no visual
alerts will be seen)
Tone
Voice
Visual Display
Two beeps
Bright
Display returns
to full brightness
Nothing Comes Close to a Cobra
®
7