Digiview Data Display Brightness - Cobra 12 BAND XRS 9630 Operating Instructions Manual

9495 XRS 9630-D-B2 4/10/06
Settings
Your Detector

DigiView Data Display Brightness

Your detector has a Bright display mode (for daytime driving) and three levels
of Dim display modes (Dim for dusk driving, Dimmer for night driving and
Dark where no visual alerts will be displayed) to control the display's
brightness levels. The factory setting is Bright. The factory Dim mode
default setting is Dimmer.
Dark Indicator
.
Select/Dim Button
Press and release
To Change the Brightness to Dim
Press and release the
Tone
Select/Dim button once.
Two beeps
Dim Display Dimmer Display Dark Display
Dim Dimmer Dark
NOTE
When you change to Dim mode, the unit will enter whichever
dim default mode is set at the time.
To Change the Brightness to Bright
Press and release the
Tone
Select/Dim button again.
One beep
Bright Display
Bright
22 English
11:59 AM Page 22
Your Detector
Setting Dim Default
You can set the default level for Dim mode (Dim, Dimmer or Dark)
either in Program mode or directly using the Select/Dim button.
To Set the Display Dim Mode Default Directly Using the Set/Dim Button
Press and hold the
Visual Display
Select/Dim button
Dim, Dimmer or Dark
Release the Select/Dim
button to select the
current display as
default.
To Set the Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Display Dim,
Dimmer or Dark.
Visual Display
Bright
Settings
Select/Dim Button
Press and hold
Dim
Press
and hold
Dark
Select/Dim
button
Tone Visual Display
One beep each time the Cycles — see chart above
display cycles
None Dim, Dimmer or Dark
Tone Visual Display
Two beeps Dim
One beep Dimmer
One beep Dark
Nothing Comes Close to a Cobra
Dimmer
® 23