Digiview Data Display Brightness - Cobra 15 BAND XRS 9770 Operating Instructions Manual

Settings
Your Detector

DigiView Data Display Brightness

Your detector has a Bright display mode (for daytime driving) and three levels
of Dim display modes (Dim for dusk driving, Dimmer for night driving and Dark
where no visual alerts will be displayed) to control the display's brightness levels.
The factory setting is Bright. The factory Dim mode
default setting is Dimmer.
Dark Indicator
.
To Change the Brightness to Dim
Press and release the
Tone
Select/Dim button once.
Two beeps
Dim Display Dimmer Display
Dim Dimmer
NOTE
When you change to Dim mode, the unit will enter whichever
dim default mode is set at the time.
To Change the Brightness to Bright
Press and release the
Tone
Select/Dim button again.
One beep
Bright Display
Bright
24 English
Select/Dim
Button
Visual Display Voice
Dim, Dimmer Dim, Dimmer
or Dark or Dark
Dark Display
Dark
Visual Display Voice
Bright Bright
Settings
Your Detector
Setting Dim Default
You can set the default level for Dim mode (Dim, Dimmer or Dark)
either in Program mode or directly using the Select/Dim button.
To Set the Display Dim Mode Default Directly Using the Set/Dim Button
Press and hold the Select/
Tone or Voice
Dim button.
One beep each time the
display cycles
Release the Select/ None
Dim button to select the
current display as default.
To Set the Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone
go to Display Dim, Dimmer
Two beeps
or Dark.
One beep
One beep
Select/Dim
Button
Dim
Press
and hold
Dark
Select/Dim
button
Dimmer
Visual Display
Cycles – see chart above
Dim, Dimmer or Dark
Visual Display Voice
Dim Dim
Dimmer Dimmer
Dark Dark
Nothing Comes Close to a Cobra 25
®