Getting Started; Customer Warranty - Cobra Band Ultra XRS 9745 Operating Instructions Manual

Installation
Your Detector
Intro Operation Customer Warranty
Assistance
Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
Secondary Icons
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
Notice
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
5. Plug the power cord
into the detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
English
4

Getting Started

Your Detector
Intro Operation Customer Warranty
Getting Started Assistance
On-Off/
Volume Control
Rotate clockwise
Secondary Icons
(away from you)
To Turn On the Unit and Adjust the Audio Volume
Notice
Rotate the On-Off/
Tone Visual Display
Volume control
Three beeps Testing
clockwise (away
from you). System Ready
The display will then
cycle through the
user mode settings
(city or highway,
Intellimute and
Main Icons
SmartPower status).
Start-up is complete when the display shows – –
Important: Once the compass is calibrated, the dashes will
change to one of the cardinal compass directions (N, NE, E,
Intro Operation Customer Warranty
SE, S, SW, W, NW). See page 18 to calibrate the compass.
Assistance
Power On
Start-Up Complete
_ _
Testing
h
Secondary Icons
System Ready
NOTE
In some vehicles, power is supplied to the cigarette
Notice
Voice Alert
lighter even while the ignition is Off. If this is the case
with your vehicle and you have turned the SmartPower
Off, you should turn Off or unplug your detector when
parking for lengthy periods. Cobra recommends
leaving SmartPower at the factory setting, which is On.
Nothing Comes Close to a Cobra
•
Voice
Testing, then three
beeps
System Ready
Voice Alert
h.
® 5