Settings; Assistance; Intellishield Highway/City Modes - Cobra Band Ultra XRS 9745 Operating Instructions Manual

Settings

Your Detector
Intro Operation Customer Warranty
Settings

Assistance

IntelliShield Highway/City Modes

Your detector is equipped with IntelliShield false signal rejection technology
which consists of a Highway mode and three different levels of City modes:
Secondary Icons
City X, City X Beep Off and City X+K. City X mode sounds a single beep when
the signal is first detected. City X Beep Off mode prevents all X band audio
alerts until the signal strength reaches Level 3. City X+K mode combines the
City X mode with prevention of K band audio alerts until the signal strength
reads Level 2. This will reduce false alerts while you are driving in or near
Notice
urban areas where there are many sources for conflicting X or K band signals
such as microwave towers and automatic door openers. The factory setting
Main Icons
is Highway. The factory City mode default setting is City X.
Intro Operation Customer Warranty
Assistance
To Change From Highway Mode to City Mode
Press and
Tone Visual Display
release the
One beep c appears in
Set/City button.
Secondary Icons
the display
City Mode
NOTE
When you change to City mode, the unit will enter
N W c
Notice
whichever city default mode is set at the time.
To Change From City Mode Back to Highway Mode
Press and release
Tone Visual Display
the Set/City
Two beeps h appears in
button again.
the display
Highway Mode
N W h
10 English
Your Detector
Intro Operation
Setting City Default
•
You can set the default level for City mode (City X, City X Beep Off and
City X+K) either in Program mode or directly using the Set/City button.
Secondary Icons
Notice
Set/City Button
To Set the City Mode Default Directly Using the Set/City Button
Press and release
Press and hold the
Set/City button.
Voice
Release the Set/City
City X or City X Beep button to select the
Off or City X, K current display as
default.
To Set the City Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to City.
Voice
Highway
Settings
Customer Warranty
Assistance
Set/City Button
Press and hold
City X
Press and
hold the
City
Set/City
X+K
button
City X
Beep Off
Tone or Voice Visual Display
One beep each time the Cycles – see chart above
display cycles
None City X Beep Off,
City X+K or City X
Tone Visual Display Voice
One beep City X Beep Off City X Beep Off
One beep City X+K City X, K
Two beeps City X City X
City X Beep Off City X+K City X
City X City X+K City X
Beep Off
Nothing Comes Close to a Cobra ® 11