Intellimute - Cobra Band Ultra XRS 9745 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

IntelliMute

Assistance
Main Icons
IntelliMute is a unique feature that allows you to avoid alerts you don't need
to hear because you are stopped or moving slowly. By sensing the "revs"
(RPMs) of your engine, IntelliMute knows when you are at low speed and
automatically mutes audio alerts (except for strobe signals from emergency
Secondary Icons
vehicles).
Intro Operation Customer Warranty
Assistance
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 15). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
Notice
each time the power is turned On. An i will appear in the display when
Secondary Icons
IntelliMute is On. The factory setting is IntelliMute Off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine's revs. In such cases, you can reduce unwanted audio alerts
Notice
by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone Visual Display
go to IntelliMute.
Two beeps IntelliMute On,
then i appears
in the display
One beep IntelliMute Off
IntelliMute On IntelliMute Off
Intelli
Mute
On
NW i h
14 English
Your Detector
Intro
What to Remember While Using IntelliMute
IntelliMute works with all City and Auto Mute modes.
Whenever engine revs are below the activation point, an arrow
pointing down will appear in the display. Above the activation point,
Main Icons
Secondary Icons
an arrow pointing up will appear.
Below Activation Point
Main Icons
N W
Intro Operation
If, for any reason, the unit stops sensing your engine's revs,
IntelliMute will indicate an error and automatically turn Off.
Intro Operation
The rev point you set will be stored in the unit's memory when
Secondary Icons
power is turned Off and recalled each time the power is turned On.
Secondary Icons
Main Icons
Notice
Notice
Voice
Intro Operation Customer
Assistance
IntelliMute On
Setting the IntelliMute Activation Point
Customer
Installation
IntelliMute Off
Assistance
Your detector must be installed in your vehicle.
Secondary Icons
Intelli
Notice Caution
Mute
IntelliMute must be turned On before setting the activation point.
Off
Settings
Operation Customer Warranty
Assistance
Above Activation Point
i h N W i h
Customer Warranty
Assistance
Notice
Customer Warranty
Assistance
NOTE
The rev point must be reset if you use your detector in a different vehicle.
NOTE
When initially choosing your IntelliMute activation point, a setting
of approximately 300 to 600 RPMs above idle is recommended.
Warranty
You can reset the activation point at any time to fit your individual
preferences and driving style.
CAUTION
Do not attempt to set the rev point while driving.
Your vehicle should be parked and idling.
Warning
Nothing Comes Close to a Cobra ® 15