Copy Function - Samson 5757-7 Mounting And Operating Instructions

Data transmission
Uploading data from the actuator to memory pen
2. Select Modify memory pen status in Memory pen menu.
Check Automatically write to memory pen in the dialog box.
Click OK button to confirm.
3. Remove memory pen from PC and plug it
into the serial interface of the actuator
(Fig. 16).
Actuator data are uploaded onto the
memory pen.
The yellow LED blinks twice several times
(see section 2.3).
Data transmission is completed when the
LED is illuminated continuously.
Remove the memory pen from the actuator.
Downloading data from the memory pen to the actuator
2. Select Modify memory pen status in Memory pen menu.
Check Automatically read from memory pen in the dialog box.
Click OK button to confirm.
3. Remove memory pen from PC and plug it
into the serial interface of the actuator
(Fig. 16).
Data are downloaded from the memory
pen into the actuator.
The yellow LED blinks once several times
(see section 2.3).
Data transmission is completed when the
LED is illuminated continuously.
Remove the memory pen from the actua-
tor.

8.2.3 Copy function

The memory pen can be used to copy setting data to other Type 5757-7 Actuators as soon
as the data from the actuator have been transferred to the memory pen.
48
EB 5757-7 EN