Changing The User Level; Configuration - Samson 5757-7 Mounting And Operating Instructions

Configuration and operation using TROVIS-VIEW interface
6. Select Customer data in Edit menu to en-
ter data relevant to the plant, e.g. project
name, plant location, operator.
7. Select Load Factory Defaults in Edit menu
if you want to load default settings onto
the operator interface.
7.4

Changing the user level

Note: The user level can only be changed in offline mode.
1. Select User Level in Device menu.
2. Select "Specialist" from drop-down list.
3. Enter password. This password is "samson" in the
delivered state.
Click Modify Password button to open the window where you can change the password.
7.5

Configuration

Properties of data points are indicated by icons on clicking on a folder:
Icon Meaning
Data cannot be changed
Data can be changed
Data point can be executed
Data point is user-defined
Mark to indicate error
Value has exceeded maximum limit
Value has fallen below minimum limit
Source of data:
Value has been modified manually
Value has been uploaded from the device.
In online mode,
Value originates from a stored file
Value has been adopted from memory pen
34
EB 5757-7 EN
X
in the icon indicates a value has been updated.