Security Menu - Lexmark W850dn User Manual

Menu item
SMTP Server Authentication
No authentication required
Login/Plain
CRAM-MD5
Digest-MD5
NTLM
Kerberos 5
Device-Initiated E-mail
None
Use Device SMTP Credentials
Device Userid
Device Password
Kerberos 5 Realm
NTLM Domain

Security menu

Miscellaneous menu
Menu item
Login Restriction
Login failures
1-10 (3 attempts)
Failure time frame
1-60 (5 minutes)
Lockout time
1-60 (5 minutes)
Panel Login Timeout
1-900 (3 seconds)
Remote Login Timeout
1-120 (10 minutes)
Enable Drive
Enable
Disable
Description
Specifies the type of user authentication required
Note: "No authentication required" is the factory default setting.
Specifies what credentials will be used when communicating to the
SMTP server. Some SMTP servers require credentials in order to send e-
mail.
Notes:
None is the factory default setting for Device-Initiated E-mail.
•
Device Userid and Device Password are used to log in to the SMTP
•
server when "Use Device SMTP Credentials" is selected.
Description
Limits the number and time frames of failed login attempts from the printer control
panel before all users are locked out
Notes:
"Login failures" specifies the number of failed login attempts before users are
•
locked out. 3 attempts is the factory default setting.
"Failure time frame" specifies the time frame during which failed login attempts
•
can be made before users are locked out. 5 minutes is the factory default setting.
"Lockout time" specifies how long users are locked out after exceeding the
•
login failures limit. 5 minutes is the factory default setting.
"Panel Login Timeout" specifies how long the printer remains idle on the Home
•
screen before automatically logging the user off. 3 seconds is the factory default
setting.
"Remote Login Timeout" specifies how long a remote interface (for example,
•
the Web page) can remain idle before automatically logging the user off. 10
minutes is the factory default setting.
Enables or disables support for the front USB port.
Understanding printer menus
97