Adjusting Toner Darkness - Lexmark W850dn User Manual

Finisher Bin 2 finishing features
Size
Two-hole punch
A3
A4
A5 X
Executive
Folio
JIS B4
JIS B5
Legal
Letter
Statement X
Tabloid
Universal X
Envelopes (any X
size)
Oficio
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3-hole punch and 10 in. (254 mm)
for a 4-hole punch.
Punch—Two-, three-, or four-hole punch settings
Single staple—One staple
Dual staple—Two staples

Adjusting toner darkness

1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings.
3
Click Print Settings.
* Three- or Offset
Four-hole punch
Note: Supported
only if feeding
orientation is long
edge.
X X
X
X
Note: Supported
only if feeding
orientation is long
edge.
X X
X
X X
X
Printing
75
Single staple Dual staple
Note: Supported
only if feeding
orientation is long
edge.
X X
Note: Supported
only if feeding
orientation is long
edge.
X
X X