Quality Menu; Print Resolution - Lexmark W850dn User Manual

Menu item
N-up Border
None
Solid
Staple Job
Off
Auto
Front
Back
Dual
Hole Punch
Off
On
Hole Punch Mode
2, 3
2, 4
Offset Pages
None
Between Copies
Between Jobs

Quality menu

Menu item

Print Resolution

300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Description
Prints a border around each page image when using N-up (pages-sides)
Note: None is the factory default setting.
Specifies whether print jobs are stapled
Notes:
Off is the factory default setting. Print jobs are not stapled.
•
Envelopes are not stapled.
•
Specifies whether a hole punch is applied to print jobs
Notes:
This menu item is available only when a finisher with Hole Punch is installed.
•
Off is the factory default setting. A hole punch is not applied to print jobs.
•
Specifies the number of hole punches in print jobs
Notes:
This menu item is available only when a finisher with Hole Punch is installed.
•
The values of 2 and 3 are displayed only when the 3 Hole Finisher, that can also
•
be used for 2 holes, is installed.
The 3 hole finisher allows the user to select 2 or 3 hole punch.
•
The 4 hole finisher allows the user to select 2 or 4 hole punch.
•
Stacks copies or print jobs into staggered sets in an output bin
Notes:
None is the factory default setting. No pages are offset during the print job.
•
Between Copies offsets each copy of a print job.
•
Between Jobs offsets each print job.
•
Description
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Understanding printer menus
108