Placing paper in the trays
Page orientation is important when printing on letterhead. Use the following sections to determine which direction
to load the letterhead.
Source or process
Standard 500-sheet trays
Optional 500-sheet trays
Optional 2,000-sheet dual input trays
Optional 2,000-sheet high capacity feeder Preprinted letterhead design is placed facedown.
Multipurpose tray (simplex printing)
Duplex (two-sided) printing from trays
Orienting the paper for long- or short-edge printing
Paper trays
Short-edge orientation
With finisher
Without finisher
Print side
Preprinted letterhead design is placed faceup.
Preprinted letterhead design is placed facedown.
Preprinted letterhead design is placed facedown.
Sheet placement is faceup in the 2,000-sheet high capacity feeder and the
multipurpose feeder.
Long-edge orientation
With finisher
Without finisher
Printing
65