Replacing The Access Panel - Lexmark W850dn User Manual

6
Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board.
The hard disk snaps into place.
7
Reinstall the system board.

Replacing the access panel

After you have installed options on the printer system board, follow these steps to reattach the access panel.
Note: This operation requires a #2 Phillips screwdriver.
1
Align the tabs on the right side of the access panel with the slots on the printer.
2
Slide the panel to the right, and then push it towards the printer.
Additional printer setup
24