7562
StapleSmart finisher and High-capacity output stacker
Finisher or stacker access door beacon LED and beacon housing removal
See"Finisher assembly" on page 7-32
1.
Remove the option from the printer.
2.
Remove the left access door assembly. See
on page
4-315.
3.
Remove the screw (A), and remove the beacon card.
Finisher or stacker bin-full spring removal
See"Finisher assembly" on page 7-32
1.
Remove the option from the printer.
2.
To remove the front spring, remove the front cover. See
page
4-313.
To remove the rear spring, remove the controller card. See
assembly removal" on page
4-308
Service Manual
for the part number.
"Finisher or stacker left access door assembly removal"
for the part number.
"Finisher or stacker front cover removal" on
4-310.
"Finisher or stacker controller card