Mdc - Toshiba PORTEGE M400 Maintenance Manual

4 Replacement Procedures

4.19 MDC

Removing the MDC
The following describes the procedure for removing the MDC. (See Figure 4-35 and 4-36.)
1. Remove the following screws securing the MDC.
2. Remove the MDC from the connector CN3010 on the system board.
3. Disconnect the MDC cable from the connector on the MDC.
4-54
Get user manuals: See SafeManuals.com
• M2.0×4.0B
BIND screw

MDC

MDC cable
Figure 4-35 Removing the MDC
[CONFIDENTIAL]
×2
M2.0x4.0B BIND
M2.0x4.0B BIND
CN3010
PORTEGE M400 Maintenance Manual (960-541)
4.19 MDC