Toshiba PORTEGE M400 Maintenance Manual page 323

Hide thumbs Also See for PORTEGE M400:

Table of Contents

4.31 Fluorescent lamp

Removing the bezel

1. Without removing the insulation tape, turn the face of module up.

2. Release the four latches of the bezel and frame (two positions on each side). With

CAUTION: 1. Do not damage the latches and FPC.

PORTEGE M400 Maintenance Manual (960-541)

Get user manuals:

See SafeManuals.com

holding up the bezel from the lower side (FL lamp side), release the three latches on

the top to remove the bezel from the cell. (The bezel is reused.)

2. When removing the bezel, be careful not to deform the bezel.

Release the three latches on the top to remove the bezel from the cell.

Figure 4-56 Replacing 12.1 Inch TMD fluorescent lamp (4)

4 Replacement Procedure

[CONFIDENTIAL]

Chapters

Table of Contents