4 Replacement Procedures
Installing the Microphone/Front panel
The following describes the procedure for installing the microphone/front panel. (See Figure
4-30.)
1. Install the microphones (left and right) to the front panel.
2. Install the microphone hold plates (left and right) to the front panel.
3. Install the front panel to the system board in place.
4. Connect two microphone cables (left and right) to the connector CN6060 and
5. Stick the glass tape and insulator in place.
4-48
Get user manuals:
See SafeManuals.com
CN6061 on the system board.
[CONFIDENTIAL]
4.16 Microphone/Front panel
PORTEGE M400 Maintenance Manual (960-541)