4.7 Keyboard
Installing the keyboard
The following describes the procedure for installing the keyboard. (See Figure 4-10 to 4-13.)
1. Place the keyboard face down on the palm rest.
2. Connect the keyboard flexible cable to the connector CN3230 on the system board.
3. Install the keyboard cover and secure it with the following screw. (Insert the guide
CAUTION: Extra portion of the keyboard cable must be put under the keyboard flexible
4. Turn the keyboard face up and set it in place. Make sure that there is no gap between
5. Secure the keyboard with the following screws.
6. Install the keyboard holder while engaging the latches.
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals:
See SafeManuals.com
of the keyboard cover first)
• M2.5×3.0S
S-THIN HEAD screw
cover.
the keyboard and edge of the palm rest.
• M2.0×3.0S
BIND screw
4 Replacement Procedures
×1
×2
[CONFIDENTIAL]
4-23