Toshiba PORTEGE M400 Maintenance Manual page 226

3 Tests and Diagnostics
NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you
3-108
Get user manuals: See SafeManuals.com
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to "Enabled" only when "Built-in
LAN" is set to "Enabled". To activate this function, use the AC adapter.
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Diagnostic Mode
This option sets whether the BIOS Setup Diagnostic test is enabled.
Disabled The Diagnostic test is disabled.
Enabled The Diagnostic test is enabled.
(g) Language During Bootup
This option selects the language during bootup. This message appears only on
the model for TCL (Canada).
English The message is displayed in English. (Default)
French The message is displayed in French.
[CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
3.31 SETUP