Toshiba PORTEGE M400 Maintenance Manual page 71

2.4 System board Troubleshooting
D port status
(F100h)
F101h
F102h
F103h
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
Table 2-3 Debug port (Boot mode) error status (3/10)
Inspection items
Initialization of H/W (before DRAM
recognition)
Initialization of PIT channel 1
Checking DRAM type and size
(at cold boot)
Testing the stack area of SM-RAM
Configuring cache memory
Permission of L1/L2 cache
memory
Checking the access of a CMOS
(Only in Cold Boot)
Examining the battery level of
CMOS
Checksum check of CMOS
Initializing data in CMOS (1)
Setting up of IRT status
Storing the size of DRAM
Branch of resuming (only in Cold
Boot)
2 Troubleshooting
Details
Initialization of MCHM
Initialization of ICH7M.D30.Func0
Initialization of ICH6M.D31.Func0
Initialization of ICH6M.D31.Func1/2
Initialization of USB controller
Initialization of ICH7M.D31.Func3
Initialization of TI controller
(Setting the refresh interval to "30μs")
When unsupported memory is connected,
the system beeps and halts
When DRAM size = 0, halts
When it can not be used as stack area,
halts
When error is detected, halts
(Setting of boot status and IRT busy flag,
The rest bits are set to 0)
When a CMOS error is detected, it does
not resume
If "resume status code" is not set, no
resume occurs
[CONFIDENTIAL] 2-23