Lexmark Pro915 User Manual page 35

Load up to
25 sheets of labels
50 transparencies
10 iron-on transfers
Make sure
•
You use full label sheets. Partial sheets (with areas exposed by missing
labels) may cause labels to peel off during printing, resulting in a paper
jam.
•
You load letter‑ or A4‑size label sheets.
• The print side of the labels faces down.
•
The top of the labels feeds into the printer first.
• The paper guides rest against the left, right, and bottom edges of the
label sheets.
•
The rough side of the transparencies faces down.
• You load letter‑ or A4‑size transparencies.
•
You remove any paper backing sheets from the transparencies before
loading.
•
If the transparencies have a removable strip, then each strip faces
down.
•
The paper guides rest against the left, right, and bottom edges of the
transparencies.
Note: Transparencies require more drying time. Remove each transparency
as it exits, and allow it to dry to avoid ink smudging.
•
You follow the loading instructions that came with the iron-on
transfers.
•
The print side of the transfers faces down.
• The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
Loading paper and original documents
35