Lexmark Pro915 User Manual page 113

Installing the printer on an Ethernet network
Before you install the printer on an Ethernet network, make sure that:
•
You have completed the initial setup of the printer.
•
Your network is set up and working properly.
•
Your computer is connected to your network.
For Windows users
1
Close all open software programs.
2
Insert the installation software CD.
If the installation dialog does not appear after a minute, then launch the CD manually:
a
Click , or click Start and then click Run.
b
In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c
Press Enter, or click OK.
3
Follow the instructions on the computer screen.
Note: Select Ethernet connection when prompted to select a connection type.
For Macintosh users
1
Close all open applications.
2
Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3
Double-click the software installer package.
4
Follow the instructions on the computer screen.
Note: Select Ethernet connection when prompted to select a connection type.
Configuring security
Simple wireless networks require WEP keys or a WPA/WPA2 passphrase, or may not have any security at all.
More‑advanced wireless network security can require one or more certificates and an authentication server. If the
network requires a certificate and you do not have it, fill out the certificate request form provided within the
Wireless Setup Utility and follow your organization's procedures for requesting a certificate for network access.
Following is the list of supported types of wireless network security and their requirements.
WEP
•
WEP key (up to four keys may be required)
•
Default WEP Transmit Key (if more than one WEP key is configured, this specifies which one to use)
WPA Personal, WPA2‑Personal or WPA2‑Enterprise
• Pre‑shared key
•
Encryption (AES or TKIP)
Networking
113