Lexmark Pro915 User Manual page 110

4
Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
5
Double‑click Lexmark Extras > Lexmark Setup Assistant.
6
Follow the instructions on the computer screen.
7
A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing
the printer over an Ethernet connection.
Using the printer locally (USB)
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1
Firmly plug the square end of the USB cable into the back of the printer.
2
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
3
Add the printer. See "Adding the printer" on page 111.
4
A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing
the printer over an Ethernet connection.
If the printer is currently set up for wireless
1
Attach a USB cable to the computer and to the printer.
2
Add the printer. See "Adding the printer" on page 111.
3
A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing
the printer over a wireless connection.
Using the printer over an Ethernet network
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for wireless
1
Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.
2
Wait a minute for the Ethernet network adapter to become active and acquire an IP address from the network.
3
Add the printer. See "Adding the printer" on page 111.
4
A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing
the printer over a wireless network.
If the printer is currently set up locally (using USB connection)
1
Plug an Ethernet cable into the printer and to an available port on a switch or wall jack.
2
Insert the installation software CD into the computer you want to use to configure the printer.
3
Follow the instructions on the computer screen.
Note: You will need a USB cable to complete the configuration.
Networking
110