Lexmark Pro915 User Manual page 114

EAP‑MD5, MSCHAPv2, or LEAP
• RADIUS user name
•
RADIUS password
PEAP
•
RADIUS user name
• RADIUS password
•
CA certificate
EAP‑TLS
•
RADIUS user name
•
RADIUS password
•
CA certificate
• Signed certificate
EAP‑TTLS
• appropriate inner authentication
•
RADIUS user name
•
RADIUS password
•
CA certificate
Configuring 802.1X Authentication
The information you must complete is dependent on the 802.1X security mechanism you select. Some require user
names, passwords, and/or certificates. If your network contains multiple access points with different modes of
authentication, then you can select and configure more than one authentication mechanism.
1
From the Configure 802.1X Authentication dialog, type the user name and password for the authentication
server.
2
Confirm the password, and then check the selected authentication mechanism.
If you have selected
EAP‑MD5, LEAP, or
MSCHAPv2
PEAP or EAP‑TTLS
EAP‑TLS
3
Click OK, and then follow the instructions on the computer screen.
Do this
Proceed to the next step.
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
locate the certificate file.
a
Click Install Signed Certificate, and then type the path to the signed certificate, or click
Browse to locate the certificate file.
b
Click Install CA Certificate, and then type the path to the CA certificate, or click Browse
to locate the certificate file.
Networking
114