Lexmark Pro915 User Manual page 171

M
AKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS NETWORK
If the printer is not on the same wireless network as the computer, then you will not be able to print wirelessly.
The SSID of the printer must match the SSID of the computer, if the computer is already connected to the wireless
network.
For Windows users
1
Obtain the SSID of the network that the computer is connected to.
a
Type the IP address of your access point into the address field of your Web browser.
If you do not know the IP address of the access point:
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type cmd.
3
Press Enter or click OK.
4
Type ipconfig, and then press Enter. Check the Wireless Network Connection section:
•
The "Default Gateway" entry is typically the access point .
•
The IP address appears as four sets of numbers separated by periods, such as 192.168.2.134.
b
Type the user name and password of the access point when prompted.
c
Click OK.
d
In the Wireless settings section, look for the SSID.
e
Write down the SSID.
Note: Make sure you copy it exactly, including any capital letters.
2
Obtain the SSID of the network that the printer is connected to:
a
From the printer, print a network setup page.
b
In the Wireless section, look for SSID.
3
Compare the SSID of the computer and SSID of the printer.
If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.
If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by
the computer.
For Macintosh users with an AirPort base station
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Network > AirPort
The SSID of the network that the computer is connected to is displayed in the Network Name menu.
2
Write down the SSID.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Internet Connect > AirPort
The SSID of the network that the computer is connected to is displayed in the Network menu.
2
Write down the SSID.
Troubleshooting
171