Lexmark Pro700 Series User Manual page 106

Using the printer wirelessly
Select the connection type that describes how you currently access your printer:
If the printer is currently set up locally (using USB connection)
1
Click or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Select Printer Home.
4
Click the Settings tab.
5
Click the Wireless setup utility link.
6
Follow the instructions on the computer screen to set up the printer wirelessly.
Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.
If the printer is currently set up for Ethernet
1
Unplug the Ethernet cable from the printer.
2
Place the printer close to the computer you want to use to configure the printer for wireless access.
Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close enough
to the computer for your USB cable to reach both.
3
Click or Start.
4
Click All Programs or Programs, and then select the printer program folder from the list.
5
Select Printer Home.
6
Click the Settings tab.
7
Click the Wireless setup utility link.
8
Follow the instructions on the computer screen to set up the printer wirelessly.
Using the printer locally (USB)
Select the connection type that describes how you currently access your printer:
If the printer is currently set up for Ethernet
1
Attach a USB cable to the computer and to the printer.
2
Wait for a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer (see "Selecting the printer" on page 107).
If the printer is currently set up for wireless
1
Attach a USB cable to the computer and to the printer.
2
Wait a moment for Windows to locate the driver and finish setting up the printer.
3
Select the USB printer (see "Selecting the printer" on page 107).
Note: You can continue to use the printer through Ethernet or wireless connection.
Networking
106