IPSec
Internet Protocol Security is a protocol for securing communications by packet level encryption and authentication.
On this page, you can enable and remove IPSec connections, or edit existing connections.
1. In the left navigation bar, click
2. Complete the fields, using the information provided in the following table.
3. If desired, click
Advanced IKE Settings
these settings, see
"Advanced IKE
4. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Advanced Setup
>
IP Sec
and then click Add. The following page appears.
to select Phase 1 and Phase 2 specific parameters. For detailed information about
Settings".
91