Table of Contents
Advertisement
2. To create a new interface group, enter a unique
below.
3. If this new grouped interface is to share the WAN interface, click
cause the WAN interface you select to be removed from any other interface groups.
Important: If a vendor ID is configured for a specific client device, make sure to reboot the client device attached to the gate-
way to allow it to obtain an appropriate IP address.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Group
Name, then proceed with either step 3 (dynamic) or step 4 (static)
Shared WAN
Interface. Not selecting this option this will
88
Advertisement
Table of Contents
