Table of Contents
Advertisement
1. In the left navigation bar, click
2. In the
Logout Timer Period
minutes. The default is 15 minutes. To disable this feature, enter a zero (0) in the field.
Update Software
On this page, you can update the firmware of your SmartRG gateway. Software updates for SmartRG products are available for down-
load by direct customers of SmartRG via the SmartRG Customer Portal.
1. In the left navigation bar, click
2. Follow the on-page instructions. When the update has completed, the gateway reboots.
Reboot
Occasionally, troubleshooting measures may require that the gateway be rebooted. On this page, you can reboot your gateway.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Management
>
Access Control
field, type the number of minutes after which a session will be ended. Options are 0 - 60
Management
>
Update
Software. The following page appears.
>
Logout
Timer. The following page appears.
123
Advertisement
Table of Contents
