Table of Contents
Advertisement
Multicast
Multicast methodology is used for applications shipping information simultaneously to multiple destinations. The most common scen-
ario is Internet television and other streaming media. In IP Multicast, the implementation occurs at the IP routing level, where
routers create the most efficient distribution paths for packets sent to a destination.
On this page, you can configure the multicast settings.
1. In the left navigation bar, select
2. Modify the settings as needed, using the information in the table below. The same fields are provided for both IGMP and MLD
configuration.
3. To add addresses to the exception lists, in the
ation and then click Add.
Note: For the IGMP list, the
must be a valid IPv6 address.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Advanced Setup
> Multicast. The following page appears.
Group Exception List
Group Address
must be between 244.x.x.x and 239.x.x.x. For the MLD table, the
tables, enter any additional address and mask inform-
Group Address
98
Advertisement
Table of Contents
