Table of Contents
Advertisement
Field Name
Description
Traffic Class Name
Enter a descriptive name for this rule. This is a free-form text field.
Rule Order
Select whether this rule is processed last in the list of classification rules. The only
option is Last.
Rule Status
Select whether this rule is active or inactive. Options are Disable and Enable.The
default is Enable.
Specify Classification Criteria
Select an interface for incoming data. Options are LAN , WAN , Local and any interface
Ingress Interface
already configured for your gateway.
Ether Type
Select the Ethernet interface type for this classification. Options are IP, ARP, IPV6,
PPPoE_DISC, pPPoE_SES, 8865, 8866, and 8021Q.
802.1P priority
(For
used to differentiate traffic. Lower values assign higher priorities. Options are: 1 - 7.
Source MAC Address
(Not applicable for
Source MAC Mask
MAC Mask for this classification.
Destination MAC Address
(Not applicable for
Destination MAC Mask
tination MAC Mask for this classification.
Source IP Address[Mask]
(Not applicable for
subnet mask for this classification, or select a DHCP option from the drop-down list and
enter the address and mask for that server.
Destination IP Address
(Optional) (Not applicable for
[Mask]
and subnet mask for this classification.
Differentiated Service
(Optional) (Not applicable for
Code Point (DSCP) Check
marking incoming data.
Protocol
(Optional) (Not applicable for
this classification.
Specify Class Queue
(Not applicable for
Note: Make sure to select a queue that is configured for the interface that you selec-
ted. If you select a queue that is not configured for the selected interface, any packets
classified into that queue are processed by the default queue for the interface.
Specify Classification Results
Specify Egress Interface
Select the egress interface for this rule. Options are the interfaces already configured.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
section
Ether Type
of 8021Q only) This value is inserted into the Ethernet frame and
Ether Type
Ether Type
Ether Type
Ether Type
Ether Type
Ether Type
Ether Type
section
of 8021Q) Enter the source MAC Address and Source
of 8021Q) Enter the destination MAC Address and des-
of 8021Q) (Optional) Enter the source IP address and
of 8021Q) Enter the destination IP address
of 8021Q) Select the desired DSCP code for
of 8021Q) Enter the Protocol specified for
of 8021Q) Select from the available queues.
71
Advertisement
Table of Contents
