Rear Panel - Leviton 47611-GT4 User Manual

Rear Panel

This button has two (2) functions:
Reset Button
•
•
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED
4. Release the Reset Button. The Internet Gateway is now using the
WAN port Connect the DSL or Cable Modem here. If your modem came with a
(10/100BaseT) cable, use the supplied cable. Otherwise, use a standard LAN cable.
10/100BaseT Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
LAN connections
Note:
Any LAN port on the Internet Gateway will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Power port Connect the supplied power adapter here.
Figure 3: Rear Panel
Reboot. When pressed and released, the Internet Gateway will
reboot (restart).
Clear All Data. This button also can be used to clear ALL data
and restore ALL settings to the factory default values. Hold in
for 5-7 seconds.
LED has flashed TWICE.
factory default values.
Introduction
5