Connection Status - Pptp - Leviton 47611-GT4 User Manual

Internet Gateway User Guide

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be
displayed when the "Connection Details" button is clicked.
Data - PPTP Screen
Connection
Physical Address The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This address
IP Address
is allocated by your ISP (Internet Service Provider).
PPTP Status This indicates whether or not the connection is currently established.
•
•
Connection Log
•
Connection Log
•
Buttons
If not connected, establish a connection to your ISP.
Connect
If connected to your ISP, hang up the connection.
Disconnect
Figure 23: PPTP Status Screen
If the connection does not exist, the "Connect" button can be
used to establish a connection.
If the connection currently exists, the "Disconnect" button can be
used to break the connection.
The Connection Log shows status messages relating to the
existing connection.
The "Clear Log" button will restart the Log, while the Refresh
button will update the messages shown on screen.
36