Options - Leviton 47611-GT4 User Manual

Internet Gateway User Guide

Options

This screen allows advanced users to enter or change a number of settings. For normal opera-
tion, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Data - Options Screen
Backup DNS
Enter the IP Address of the DNS (Domain Name Servers) here. These
IP Address
DNS will be used only if the primary DNS is unavailable.
TFTP
•
Enable Firm-
ware Upgrade
using TFTP
UPnP
•
Enable UPnP
Services
•
•
•
Allow Configu-
•
ration...
Figure 41: Options Screen
If enabled, TFTP (Trivial FTP) can be used to upgrade the firm-
ware in this device. This is normally not required; a Windows
utility is available for this purpose.
UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported by Windows ME, XP, or later.
If Enabled, this device will be visible via UPnP.
If Disabled, this device will not be visible via UPnP.
If checked, then UPnP users can change the configuration.
If Disabled, UPnP users can only view the configuration. But
currently, this restriction only applies to users running Windows
XP, who access the Properties via UPnP. (e.g., Right - click the
Internet Gateway in My Network Places, and select Properties)
66