Default Schedule Screen
This screen is displayed when the Define Schedule button on the Blocked Packet screen is
clicked.
•
This schedule can be (optionally) applied to any Blocked Packet Group.
•
Blocking will be performed during the scheduled time (between the "Start" and "Finish"
times.)
•
Two (2) separate sessions or periods can be defined.
•
Times must be entered using a 24 hr clock.
•
If the time for a particular day is blank, no action will be performed.
Data - Default Schedule Screen
Each day of the week can be scheduled independently.
Day
Session 1
Two (2) separate sessions or periods can be defined. Session 2 can be
Session 2
left blank, if not required.
Start Time
Enter the start, using a 24 hr clock.
Finish Time
Enter the finish time. using a 24 hr clock.
Figure 29: Default Schedule Screen
Advanced Features
45