Remote Admin - Leviton 47611-GT4 User Manual

Internet Gateway User Guide

Remote Admin

If enabled, this feature allows you to manage the Internet Gateway via the Internet.
Figure 44: Remote Administration Screen
Data - Remote Administration Screen
Remote Administration
Enable Remote Enable to allow management via the Internet. If Disabled, this device
Management will ignore management connection attempts from the Internet.
Port Number Enter a port number between 1024 and 65535 (8080 is recom-
mended). This port number must be specified when you connect (see
below).
Note: The default port number for HTTP (Web) connections is port
80, but using port 80 here will prevent the use of a Web "Virtual
Server" on your LAN. (See Advanced Internet - Virtual Servers)
You must use this IP Address to connect (see below).
Current IP
This IP Address is allocated by your ISP. But if using a Dynamic IP
Address
Address, this value can change each time you connect to your ISP.
So it is better if your ISP allocates you a Fixed IP Address.
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the Internet
Gateway. If the port number is not 80, the port number also is required. (After the IP Ad-
dress, enter ":" followed by the port number.)
e.g. ,
HTTP://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
72