Services Screen - Leviton 47611-GT4 User Manual

Internet Gateway User Guide

Services Screen

This screen is displayed when the Edit Service List button on the Blocked Packet screen is
clicked.
Data - Services Screen
Available Services
Available Services This lists all the available services.
"Delete" button Use this to delete any Service you have added. Pre-defined Services
can not be deleted.
Add New Service
Name Enter a descriptive name to identify this service.
Type Select the protocol (TCP, UDP, ICMP) used to the remote system or
service.
For TCP and UDP Services, enter the beginning of the range of port
Start Port
numbers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
For TCP and UDP Services, enter the end of the range of port num-
Finish Port
bers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
ICMP Type For ICMP Services, enter the type number of the required service.
Buttons
Delete Delete the selected service from the list.
Save Add a new entry to the Service list, using the data shown in the "Add
New Service" area on screen.
Figure 30: Blocked Packet - Services
46